Blood Specimen Tubes Features:
· accurate vacuum draw volume
· excellent performance additive
· clear label, doesn't break off
· colorless/ transparent tube, visuable of the inside contents
· can bear a centrifugal force more than 3000 xg
· for single use only
· Shelf time 18 months for PET, 24 months for glass
| Model | ST8001-1/ST8001-2/ST9001-1/ST9001-2 |
| Place of Origin: | China |
| Quality Certification: | ce |
| Instrument classification: | Class II |
| size: | 4ml/5ml/10ml |
| use | inactivated virus preservation solution |
| Feature | Avoid cross-infection of centralized sampling |
| Feature | Reduce the difficulty of storage and transportation |
10ml inactivated virus preservation solution Blood Specimen Tubes
Use
For the collection and transportation of clinical samples. It
cannot be used for microbial identification and drug susceptibility
testing.
10ml inactivated virus preservation solution Blood Specimen Tubes
Main components
Guanidine isothiocyanate, Tris, EDTA, etc.
Blood Specimen Tubes Storage conditions and validity period
Storage conditions: 5-25℃; valid period: 12 months
Blood Specimen Tubes Limitations of the test method
This product is only used for the collection, transportation and
storage of clinical virus samples.
Blood Specimen Tubes Product Performance Index
pH value: The pH value is 7.8-8.2 when stored at 25°C;
Quantity: not less than the marked quantity;
Stability: The product should maintain the stability of various properties
within one month after the expiration date.
【Sample requirements】
Specimens should be transported to the corresponding laboratory
within 2 working days after collection, and the storage temperature
should be 2-8℃; if they cannot be sent to the laboratory within 48
hours, they should be stored at -70℃ or below, and the collected
samples should be guaranteed Send to the corresponding laboratory
within 1 week, during which repeated freezing and thawing should be
avoided as much as possible.
【How to use virus sampling tube】
1. Before sampling, mark the relevant sample information on the
label of the sampling tube.
2. According to different sampling requirements, use a sampling
swab to sample the corresponding part.
3. Quickly put the swab into the sterile sampling tube.
4. Break off the part of the sampling swab higher than the sampling
tube, and tighten the tube cap.
5. Freshly collected clinical specimens should be transported to
the laboratory within 48 hours at 4°C. If they cannot be sent to
the laboratory within 48 hours, they should be stored at -70°C or
below. Specimens should be inoculated and separated as soon as
possible after being sent to the laboratory. Those that can be
inoculated and separated within 48 hours can be stored at 4°C. If
not inoculated, it should be stored at -70℃ or below (inactivated
ones can be stored at room temperature).
