| Model | ST8001-1/ST8001-2/ST9001-1/ST9001-2 |
| Quality Certification: | ce |
| Instrument classification: | Class II |
| size: | 4ml/5ml/10ml |
| Disinfecting Type: | Sampling Tube |
【5ml/10Blood Specimen Tubesml PP Material High Impact Resistance
Instructions】
1. According to sampling requirements, use sampling swabs to
collect samples (for preservation solution without swabs, users can
provide matching swabs by themselves).
2. Place the sampling swab after collecting the sample into the
sampling tube.
3. Break the swab at the easy-to-break cut point of the sampling
swab rod, discard the tail, and close the tube cap
4. Mark the information as required on the label of the sampling
tube.
5. After collection, the specimen should be transported to the
corresponding influenza surveillance network laboratory within 2
working days, and the storage temperature should be 2-8℃; if it
cannot be sent to the laboratory within 48 hours, it should be
stored at -70℃ or below. And to ensure that the collected specimens
are sent to the corresponding network laboratory within 1 week.
Specimens should avoid repeated freezing and thawing.
6. Nasal swab, the collector's left hand holds the patient's
mandible, the right hand swab is gently inserted into the nasal
passage and the nasal palate, stays for a while, slowly rotates 3-5
times and then exits. Wipe the abnormal hole on the other side with
another swab. Immerse the swab head in the sampling solution,
squeeze the swab head in the sampling solution several times,
forcefully break off the tail of the swab, and discard the tail of
the swab.
7. With a throat swab, press the patient's tongue with a tongue
depressor with the left hand. Hold the swab in the right hand to
wipe the bilateral pharyngeal tonsils and posterior wall of the
pharynx, immerse the swab head in the sampling solution and squeeze
the swab head in the sampling solution several times, forcefully
break the tail of the swab, and discard the tail of the swab. You
can also collect the nasal and throat swabs in the same sampling
tube.
