| model | CT90 Dry sterilizer |
| capacity | 90 liter |
| Timer preset range | Query current time (year,Month,Day,Time,Minute) |
| Total number of sterilization and failure time and code |
| Pressure gauge display range | 0～0.6Mpa |
| pressure | The cavity design pressure is 0.4MPa. |
| The corresponding number of each product has the original product
quality certificate of the manufacturer and the original
certificate issued by the special equipment manufacturing
supervision and inspection department |
| Pressure safety protection | Two independent pipeline measurement control,Mechanical and
electronic dual pressure protection |
| Sterilization mode | Solid mode: heating → sterilization → exhaust, air cooling |
| Solid belt drying mode: heating → sterilization → drainage, exhaust
→ drying |
| Liquid mode: heating → sterilization → pre-cooling → exhaust |
| Liquid belt insulation mode: heating → sterilization → pre-cooling
→ exhaust → heat preservation |
| Waste mode: heating → sterilization → exhaust, air cooling |
| Agar mode: heating → melting → heat preservation |
| Exhaust steam control and water tank | Fully automatic internal discharge (see instructions for exhaust
temperature setting), built-in large-capacity steam condensate
collection bottle and water storage tank |
| Equipped with automatic water inlet function | The water in the steam collection bottle can be recycled to avoid
the inconvenience of frequent water addition. At the same time, it
is equipped with a high and low water level sensor. The system
automatically detects the supplementary sterilization water to the
standard water level before each operation. |
| Equipped with drying function | Equipped with a drying module, the appliance is dried after
sterilization, the effect is thorough, and it reaches the CE
standard. |
| Equipped with fan and air intake filter | After the sterilization is completed, without opening the cover,
the air is filtered by the filter and then blown by the air intake
pump. With the drying module, drying can be achieved in a sterile
state. |
| Opening method and interlocking device | Unique eight-post interlocking device, flip-type switch cover,
touch-switch handle. |
| Controller and memory storage function | Using microcomputer intelligent control system. 6 inherent
operating modes, 82 modifiable modes, a total of 88 memory and
storage programs |
| safety equipment | Door lock interlocking device; closed lid inspection; dry-burning
protection; water level sensor monitoring; electronic overpressure
protection; mechanical safety valve; |
| Over-temperature and heating protection; over-current and
short-circuit protection; leakage protection; cooling lock; safety
protection against scalding; automatic fault detection system |
| annex | Condensate collection bottle, water barrier, drain hose, stainless
steel basket |
| Optional accessories | Printer, cooling fan, item temperature sensor, U disk output |
